Browsing by Author "Mamudu, Angela Onose"

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    A review on gas well optimization using production performance models: A case study of horizontal well. Open Journal of Yangtze Gas and Oil, 3, 57 - 67
    (Scientific Research Publishing, 2018-01-31) Igwilo, Kevin C.; Okoro, Emeka Emmanuel; Nwude, Anthony Afam; Mamudu, Angela Onose; Onuh, Charles Y.
    This study considered the solution methods to determine optimal production rates and the rates of lift gas to optimize regular operational objectives. The foremost tools used in this research are offered as software platforms. Most of the optimization hitches are solved using derivative-free optimization based on a controlled well Performance Analysis, PERFORM. In line with production optimization goal to maximize ultimate recovery at minimum operating expenditure, pressure losses faced in the flow process are reduced between the wellbore and the separator. Nodal analysis is the solution technique used to enhance the flow rate in order to produce wells, categorize constraints and design corrective solution. A hypothetical case is considered and sensitivity analysis using the IPR Models for horizontal gas wells provides the effect on pressure and liquid drop out. The gas lift method is economically valuable as it produced an optimal economic water cut of 80 percent with 2 - 4 MM scf/day rate of gas injection; thus, 1800 - 2000 STB/day gas was produced.
  • Thumbnail Image
    ItemOpen Access
    Data on shale-water based drilling fluid interaction for drilling operation
    (Elsevier, 2018) Okoro, Emeka Emmanuel; Igwilo, Kevin C.; Mamudu, Angela Onose; Ekeinde, Evelyn Bose; Adewale, Dosunmu
    The shale dispersion test (rolling test) is a common procedure that is used to measure the interactions between drilling fluids and shales. The shale rolling test depends on the moisture content of the shale, the shale composition, the viscosity of the test fluid, the rotation speed of the rollers, and the test temperature. The rheological behavior of the test fluid has the strongest influence on test results. The data was generated experimentally, shale samples from Agbada an formation Niger-Delta was used. These shale samples were cored at a depth of 2000ft and 3400ft. Water based mud that will minimize shale dispersion and swelling of shale was formulated. The dispersion test was conducted, and it involves exposing a weighted quantity of sized shale to the formulated mud in roller-oven. This test is used to design fluids and screen the effectiveness of inhibitor additives to maintain the integrity of the cuttings and minimize the interaction of fluids with the shale sections during the drilling and completion operations. The swelling test was conducted and the linear expansion adopted because it is the most representative of the increase seen by the wellbore but was measured in the direction perpendicular to the bedding plane as this is the direction of swelling into the wellbore.